Nkọwapụta
| PARAMETER | UNIT | HMD320FCII |
| ọkwa nha mba ụwa | -- | 1930/320 |
| NKE INJECTION | ||
| Olu ogwu ogbugba(theoretical) | cm³ | 1435 |
| Ibu ogwu ogwu (PS) | g | 1306 |
| oz | 46.1 | |
| Ọnụọgụ ịgba ọgwụ | g/s | 543 |
| dayameta ịghasa | mm | 75 |
| Nrụgide injection | MPa | 134 |
| Screw L/D ruru | -- | 21.6:1 |
| Ịghasa ọrịa strok | mm | 325 |
| Ọsọ skru (enweghị nzọụkwụ) | r/min | 0-200 |
| MKPỌTA UNIT | ||
| Ike njigide | kN | 3200 |
| Ọrịa strok na-emeghe ebu | mm | 670 |
| Nha Platen | mm × mm | 960×960 |
| Oghere dị n'etiti ogwe tie | mm × mm | 680×680 |
| Oke ụbọchị | mm | 1340 |
| Ọkpụrụkpụ ebu (Nkeji{0}}Max) | mm | 250-670 |
| Hydraulic ejection ọrịa strok | mm | 160 |
| Ike mkpopu hydraulic | kN | 77 |
| UNIT IKE | ||
| Usoro nrụgide hydraulic | MPa | 17.5 |
| Pump moto ike | kW | 64.6 |
| Ike ikpo ọkụ | kW | 31 |
| Ọnụọgụ mpaghara njikwa okpomọkụ | -- | 5 |
| Ndị ọzọ | ||
| Ike tank mmanụ | L | 380 |
| Akụkụ igwe(L×W×H) | m×m×m | 6.8×1.8×2.4 |
| Ibu igwe | Tọn | 12 |
MKPỌTA UNIT
Hazie strok mmeghe, dabara adaba maka ihe IML chọrọ.
Ịnabata moto hydraulic dị elu iji hụ na nkwụsi ike nke plasticizing na ndụ- oge. Ọ bụ nhọrọ maka E{2}} ụgwọ iji rute ụgwọ na ofufe, mee ka oge okirikiri dị mkpụmkpụ.
NKE INJECTION
Ọkọlọtọ nwere nano-ọkụ ọkụ infrared.
ELECTRIC UNIT
Standard na SSR na nchekwa valvụ hydraulic, na-agbakwunye nchebe ọkụ ọkụ ọkụ na nchekwa nkwụnye iji melite arụmọrụ nchekwa nke igwe dum.
Ịnabata usoro njikwa INOVA iji kwalite nkenke na arụmọrụ.
UNIT hydraulic
Ịnabata servo akara usoro, ike ịzọpụta na efficiency.It bụ nhọrọ nhọrọ maka yiri ije nke eject na ofufe ibelata okirikiri oge.
Ọkọlọtọ nwere valvụ na-akụchi, mmegharị dị nro na ngwa ngwa.
Ihe nchịkọta dị ọkụ: Igwe eji akpụ akpụ akpụ nke nkata mkpụrụ osisi , China mkpụrụ osisi nkata ịgbanye igwe na-emepụta ihe, ndị na-ebu, ụlọ ọrụ
